Amazon Echo Show 5 Under Cabinet Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.31 – €8.93 net (excluding VAT)
For file: echo-show-5-top-mount-v6_02mm_pla_mk3smmu2s_9h0.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.12 excluding VAT (range midpoint).
- Weight reported by the author
- 89 g
- Print time reported by the author
- 9.01 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I got the new Amazon Echo Show 5 for my RV/motorhome and as space is limited I wanted it off the counter and under the…
- Rating
- 4.25 / 5
- Likes
- 61
- Downloads
- 632
- Makes
- 6
- Views
- 5,400
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I got the new Amazon Echo Show 5 for my RV/motorhome and as space is limited I wanted it off the counter and under the cabinet in the bedroom. I designed a mount that has a mesh back using PrusaSlicer's modifier mesh (.amf attached has this setup for you) and holes below the front section and a port in the back for the power cord. The top buttons are exposed if you want to access them and the unit is secured in place so it can't slip out of the front or sides.
Print instructions
No supports required, use modifier mesh to make the back as shown in the picture.