Happy Low Poly Elephant Ring Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.10 – €2.56 net (excluding VAT)
For file: Happy Low Poly Elephant Ring Holder_0.2mm_PLA_MINI_2h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.33 excluding VAT (range midpoint).
- Weight reported by the author
- 21 g
- Print time reported by the author
- 2.72 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Here's my attempt at making a low poly elephant for the first time. Made to hold my wife's engagement ring.
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 274
- Makes
- 2
- Views
- 1,020
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modeled in Fusion 360 using the form tool.
I printed mine with 0.4mm in PLA with 0.2 layer height.
Supports will be needed to support the belly and the tail. Be care when removing! Tail is fragile, but stable once removed from the plate.
Good chance to test organic support!
I've uploaded gcode for PrusaMini with organic support.
I used 10% infill, but you may want to go denser if you want to add more weight to it, but it is stable as-is.
Hope you like it!