SL1 Platform Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EDIT: I have redesigned after getting some excellent feedback. V5 Part A and Part B are below.
- Rating
- 4.5 / 5
- Likes
- 13
- Downloads
- 175
- Makes
- 3
- Views
- 1,250
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
EDIT: I have redesigned after getting some excellent feedback.
V5 Part A and Part B are below.
I have designed a build platform holder for the SL1 because I am lazy.
It works with low to mid sized models - taller models will still need the caveman approach of holding it in place order the vat or wasting a lot of resin.
The original model was a single object but supports killed the look of the model. I divided it into 2 models and have placed a notch on one point of the platform holder that needs to the facing the closed back of the machine fitting.
Recommend a good strong glue and allow plenty of time to set/cure
Design in Tinkercad as my license for Fusion 360 had lapsed.
Print instructions
PLA
0.15 Speed profile
20% in fill
12.79 meters of filament
Just over 3 hours to print.
RESIN
0.05
1119 layers
55ml resin used
PRUSA GREY TOUGH
4 hours 36 minutes