1 / 4
Motor mount for 3DLabprint Slingblade and Racestar 4108 — image 1
1 / 4

Motor mount for 3DLabprint Slingblade and Racestar 4108

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Here is my design of a motor mount for the 3Dlabprint Slingblade.

Rating
0 / 5
Likes
1
Downloads
25
Makes
0
Views
439
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Here is my design of a motor mount for the 3Dlabprint Slingblade.
With this motor mount you can install a Racestar 4108 in your Slingblade.
Propeller 9x6
6S / 1300 mAH LiPo
ESC 40 Amp
Very hot ;-))

There are two versions of the part. One version is for the new building, the other version for retrofitting on the original motor mount.

Print with at least 2 perimeters, 100% infill, layer height 0.2mm and support.

The engine is bolted from the inside. The screw holes must be installed horizontally so that you can screw them tight from the inside.

So have fun with it.

Print instructions

Category: R/C Vehicles Summary

Here is my design of a motor mount for the 3Dlabprint Slingblade.
With this motor mount you can install a Racestar 4108 in your Slingblade.
Propeller 9x6
6S / 1300 mAH LiPo
ESC 40 Amp
Very hot ;-))

There are two versions of the part. One version is for the new building, the other version for retrofitting on the original motor mount.

Print with at least 2 perimeters, 100% infill, layer height 0.2mm and support.

The engine is bolted from the inside. The screw holes must be installed horizontally so that you can screw them tight from the inside.

So have fun with it.

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK3

</div>Rafts:

No

Supports:

Yes

</div>Resolution:

0,2

Infill:

100 %

</div>
Filament:

OWL Filament PETG Black

Tags