Vase Mode Planter with Bottom Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Planter which is suitable for Vase Mode with a waterproof bottom insert - printed in normal mode
- Rating
- 5 / 5
- Likes
- 62
- Downloads
- 539
- Makes
- 3
- Views
- 2,104
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
I wanted to create a planter which can be printed in vase mode. Since I'm trusting the model to be waterproof, I designed a bottom which can be printed in normal mode and is then waterproof.
The Planter is designed with a wall thickness of 0,8mm. I used a 0,4mm nozzle and increased the wall thickness to 0,8mm. Worked well, a bit wobbly but stable. Printed the bottom with increased wall thickness so it is a solid model. Right now, no water passing through.
The planter is designed for 10cm saucer. In my case it suited well. Let me know your feedback.
Also let me know, if any other diameters are requested or if anything does'nt work.