E3D V6 Nozzlebox by KMS
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.62 – €1.98 net (excluding VAT)
For file: nozzlebottom_015mm_petg_mk3s_1h54m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.80 excluding VAT (range midpoint).
- Weight reported by the author
- 22 g
- Print time reported by the author
- 1.9 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
There are already many simple Nozzleboxes out there and since I now have several Nozzles, I was looking for a solution.
- Rating
- 4.6 / 5
- Likes
- 30
- Downloads
- 118
- Makes
- 5
- Views
- 681
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
There are already many simple Nozzleboxes out there and since I now have several Nozzles, I was looking for a solution. Since I love modeling in Fusion 360, I designed a new elegant box inspired by the E3D v6 design (https://e3d-online.com/). Something for the eye and to display, I think.
In the box you have space for 3 Nozzles of 0.25mm, 0.4mm and 0.6 mm. Since everything has its place, everything is neatly marked.
The NozzlBox is part of the Enclosure Collection from KMS:
https://www.prusaprinters.org/social/58577-kerle-makerspace/collections/30583
Merry X-Mass!
Happy printing and stay tuned :D
Yours KERLE MAKERSPACE
PS: Feel free to like or write a comment ;D keeps me motivated on sharing ideas ;D
Print instructions
LAYERHEIGHT: .15mm
PRINTING TEMPERATURES:
| Nozzle | Bed | |||
|---|---|---|---|---|
| First Layer | 240°C | 85°C | ||
| Other Layers | 250°C | 90°C |
Filament: Prusament PETG (Jet Black and Yellow Gold)
No Supports needed for Nozzlebottom!
Supports only on Printbet for Nozzletop!
No Glue is needed, parts simply fit together!
Tip: Use yellow or gold for brass nozzles, black for steel nozzles and if i had a ruby one, camin red :D