Plush Suguri Accelerator Wings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An upgrade to Plush Suguri's existing accelerator wings.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
An upgrade to Plush Suguri's existing accelerator wings. These wings can be used as a normal keychain or attached to Suguri's jacket buttons using the support bar. This was created for the 100% Orange Juice 2M Art Contest Submission. These were completely 3D modeled and manufactured by me.
You must 3D print mirrored versions of all the parts in order to create one full wing. Two mirrored and two base versions of each part should be printed for a total of two wings.
All parts printed without supports, 0.15mm to 0.2mm layer height. Recommended printing slower for the vertical cylinders on the cross-bar and button.
Part List
- Accelerator Base - Main Body
- The main silver body that comprises the main structure
- Support Bar
- The support bar attaches two wings together and connects to Suguri's jacket button
- Accelerator Base - Insert
- A square insert to align two halves of the main body
- Accelerator Base - Center
- The pink circular dome in the center of the main body
- Accelerator Base - Rear Flame
- The pink rear flames that insert into the body
- Accelerator Base - Mid Flame
- The pink middle flames that sandwich between the body halves
- Button
- A singular button to attach to the wings. This is optional if you don't want to use the cross bar but is not recommended due to lack of structural support when attaching to Suguri's jacket.