PTFE Tube Cutter for MK10 hotend
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An MK10 hotend requires a PTFE tube that is 34mm long, with square cut ends. This guide makes it easy to repeatably…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 23
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
An MK10 hotend requires a PTFE tube that is 34mm long, with square cut ends.
This guide makes it easy to repeatably cut your PTFE tube to 34mm. The distance from the knife slot to the end is 34mm, making it easy. It's pre-configured for an MK10, but you can use the Customizer to change the length or PTFE Tube diameter. I've included the OpenSCAD source as well. Enjoy!
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Generic PLA Grey
Notes:
This should be a pretty easy print for most, do NOT use supports!
Category: 3D Printer Accessories