HSW Holder - Paper Towel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Paper towel holder remix for the Honeycomb Storage wall
- Rating
- 5 / 5
- Likes
- 305
- Downloads
- 1,253
- Makes
- 22
- Views
- 3,709
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is remix of left/right sides from @Lukes3D Hexagonal paper towel holder to be used as part of the honeycomb storage wall.
Spacing on HSW works well to fit roll of paper towel. The sides allow flex which is helpful for adding / removing the roll.
Relies on the “insert-empty” hex part (or similar x2 x4 joiner parts) used in the HoneyComb Wall. Further types of insert-empty can be found here (reduced friction) and here (rotated position).
Hex insert peg designed with flex in mind so that holder can be inserted without requiring much force to insert or remove from wall.
Print without need for supports, the hex insert is flat to the print bed.
Printed at .20mm layer height using PLA