20mm Clip with Pan/Tilt and Lock Screw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits printers that use 2020 rails. This is a basic design to be remixed for more specific purposes.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 18
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Fits printers that use 2020 rails.
This is a basic design to be remixed for more specific purposes. It has a pad that can be glued to a flat surface of another design, or the pad can be edited in a CAD program to interface this mount with any other type of mount.
The second picture shows I gorilla glued the flat pad to a UV lamp, just one possible application.
The goblin is from here: https://cults3d.com/en/3d-model/game/hopkinsville-goblin (not free, sorry).
Print instructions
Print with supports touching build plate only; the turret has breakaway supports inside. Twist the clip piece so the turret breaks loose and can rotate. Place the piece with the pad between the loops of the turret, and insert the screw. The screw can be tightened to lock the pad into place.
This can be printed in PLA with a high infill and it is strong enough for light loads. I've had better luck with PETG and better yet with nylon. For ABS printing I found the regular model inadequate, so I've added a dedicated ABS version with enhancements unique to that material.