BBQ EDF(impeller) blower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Powerful (600W max) blower for your barbecue, can burnout firewood like it's some matches
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 124
- Makes
- 0
- Views
- 2,225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v3.0
If you have some 64mm EDF and you don't know what to do with it, this thing is just for you.
WARNING!!!
With 1.5kg of thrust it can not only ignite a firewood for your barbecue faster, but even blow out some light wood. So please be careful and Safety First!
In general this is very simple device, just a housing for all the component with some inlet protection from hot particles that can damage EDF.
Parts list:
- 64mm EDF, example
- 50A ESC with BEC
- 3S lipo battery, I have some TATTU 1800mAh
- small servo tester, link
- about 15-20cm of some hook-and-loop fastener to hold battery
- 6x brass M3 inserts
- 10x M3 bolts
- some stainless net for inlet protection (I cannibalized some cheap kitchen thing, don't even know what it was for)
Printing tips:
Correct printing orientation for each part is shown on screenshot. Main body requires support. All other parts can be printed as they are.
I can't suggest what material to use, mine one is made out of clear ABS, just because it's the main plastic I'm using and it's cheap
Other notes:
To connect main body and battery housing you need 6 brass inserts, but for servo tester housing I bolted it directly into the plastic.
My battery is smaller than available space in the housing, it was made on purpose, because I wasn't sure which battery I'm gonna use, so you can model your own adapter if you have a different one. There is 29x43x120mm of space available.