Heatset insert press
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.57 – €6.81 net (excluding VAT)
For file: Heat set press back_0.2mm_PETG_MK3S_6h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.19 excluding VAT (range midpoint).
- Weight reported by the author
- 66 g
- Print time reported by the author
- 6.95 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple heatset insert press.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 45
- Makes
- 0
- Views
- 1,278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A heatset insert press made from some extra parts I had laying around.
Uses 4 smooth 8mm rods, 6 Lmuu8 bearings(can get away with 4 or 5 though), 12 m2 screws(8 that are 6mm long, 4 that are 10mm long, though can be longer), it also uses 12m2 nuts.
If you are short on screws you could probably get away with only half the screws/nuts if needed.
the solder iron handle needs to be 20mm or smaller to fit.
The toolhead schematic is there if you want to create an alternate one that's larger.
Happy printing!