1 / 11
Engineers Dream Ring Holder with Mechanical Drive Claw
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a ring holder that has a claw that is driven by a threaded rod to hold your ring
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 502
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
This is a ring holder that has a claw that is driven by a threaded rod to hold your ring.
First part to print is the nut with wings. Then you can print the body and add a print pause or color change to encapsulate the nut in the body. I would recommend adding the print pause before the 2 body pillars come together so that you can slide the nut inside with the flat side down. Print the remaining parts, add a little glue on the back cover and the finger drive.
I used the 0.2mm setting.