Single piece dual filament roll rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Large simple cross support that holds 4 16mm diameter dowels/rods. The print is 251mm tall so requires a large surface.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 52
- Makes
- 0
- Views
- 471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
I wanted a simple filament roll rack that I could print on my BamuLab X1C. This is a large print which may not fit on many printers. I'll link to a remix of this split into 2 parts if someone makes it.
I designed it to work with 16mm diameter dowels I bought (they may have been labeled as ⅔"). I bought two 4' dowels and cut them down to four 21" rods.
Print the test piece first to test the fit with the rods. For me, I was able to get a friction fit that was still easy to insert. You can also glue the rod in place if you're a little loose.
There is about a ½" / 13mm clearance between the bottom and top rods when removing 200mm diameter rolls.
In my pictured print, I used PETG, no brim, no supports. I printed it flat (shortest possible height) with 2 top and bottom layers, 2 walls, and a grid infill at 10%. So pretty light but it's strong enough.