Voron Mobius 4 Extruder with filament sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Voron Mobius 4 Extruder with filament sensor
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 56
- Makes
- 1
- Views
- 546
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Philips head M2x10 bolt 2x
Filament switch https://a.aliexpress.com/_mKMLOSM
Cut it from the pcb and bend those pins so you can solder wires on it. Or you can use the cable provided with it, just depin the conector and slide it on the pins that are on the sensor and sqeeze the with pliers as shown o 4th picture.
Or already done https://a.aliexpress.com/_mLMWilE
Don't forget to cut of the wire that's on the NC pin, because it won't work correctly..
Before instaling the switch, deping the conector and put it thrue the hole for the cable. Don't forget to mark the cables.