.22 Long Rifle replica and snap cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
.22 Long Rifle accurately sized replica, separate bullet and case pieces, and snap cap/dummy round.
- Rating
- 5 / 5
- Likes
- 117
- Downloads
- 1,825
- Makes
- 8
- Views
- 3,374
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
.22 Long Rifle, also known as .22LR or just 22, is a rimfire firearm cartridge designed by J. Stevens Arms & Tool Company in 1887.
Print this for props, display, education, training, just because it's cool, or scale it up to become a container.
Contains 5 files:
- Accurately sized replica: 22LongRifle_cartridge.stl
- Separate bullet and case pieces for easily printing in different colors: 22LongRifle_bullet.stl and 22LongRifle_case.stl
- Snap cap/dummy round for cycle and dry fire practice, with reduced bullet size: 22LongRifle_snapcap.stl
- Information txt file with recommended print settings: 22LongRifle_info.txt
Originally uploaded on Thingiverse: https://www.thingiverse.com/thing:6054004
Print Settings:
- Material: Tested with PLA and PLA+/PLA Pro.
- Overall print size: 25.4mm tall, 7.06mm diameter.
- Layer Height/Quality: 0.16mm or less recommended, 0.12mm works best.
- Infill: 20% is fine for display, 60% or more recommended for snap cap use.
- Print Speed: 50mm/s or less recommended. I do 40mm/s for cartridge, snap cap, and case piece; then 30mm/s for bullet piece. I also do 10mm/s initial layer speed.
- Adhesion: A brim might be needed, depending on the printer and bed type. I have a textured PEI bed, and with proper calibration, additional adhesion isn't needed.
- Post print: The pieces may require some sanding or filing for proper fitment if the bottom layers bulged out a little. Fitment should be a little snug, but easy to take in and out. A properly calibrated setup shouldn't need additional work.