.277 SIG Fury replica and snap cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
.277 SIG Fury accurately sized replica; separate bullet, case, and case head/base pieces; and snap cap/dummy round.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 182
- Makes
- 0
- Views
- 595
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
.277 SIG Fury, also known as .277 Fury, 6.8x51mm, or 6.8 Common Cartridge, is a centerfire rifle cartridge developed by SIG Sauer in 2019.
Print this for props, display, education, training, just because it's cool, or scale it up to become a container.
Contains 6 files:
- Accurately sized replica: 277SigFury_cartridge.stl
- Separate bullet, case, and case head/base pieces for easily printing in different colors: 277SigFury_bullet.stl, 277SigFury_case.stl, and 277SigFury_base.stl
- Snap cap/dummy round for cycle and dry fire practice, with firing pin hole and reduced bullet size: 277SigFury_snapcap.stl
- Information txt file with recommended print settings: 277SigFury_info.txt
Originally uploaded on Cults3d: https://cults3d.com/en/3d-model/various/277-sig-fury-dummy-round-replica-and-snap-cap
Print Settings:
- Material: Tested with PLA and PLA+/PLA Pro.
- Overall print size: 71.76mm tall, 11.99mm diameter.
- Layer Height/Quality: 0.16mm or less recommended, 0.12mm works best.
- Infill: 20% is fine for display, 60% or more recommended for snap cap use.
- Print Speed: 50mm/s or less recommended. I do 40mm/s for cartridge, snap cap, and case piece; then 30mm/s for bullet piece. I also do 10mm/s initial layer speed.
- Adhesion: A brim might be needed, depending on the printer and bed type. I have a textured PEI bed, and with proper calibration, additional adhesion isn't needed.
- Post print: The pieces may require some sanding or filing for proper fitment if the bottom layers bulged out a little. Fitment should be a little snug, but easy to take in and out. A properly calibrated setup shouldn't need additional work.