Stacked stand for two Boss RC505 Loopers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand to hold two Boss RC505 loopers. Can fit both the mki and the mkii loopers
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 85
- Makes
- 0
- Views
- 829
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Here is a design to hold two Boss RC505 Loopers at an easy to use position.
The photos shows RC505mkii (top) and RC505mki (bottom) loopers.
The looper trays are pretty big and I printed them on Rat Rig V-Core 3 400mm printer. I had to stand up the tray and place it diagonally for it to fit.
Printed everything in PLA+.
You will need 2 trays and 4 thumbscrew helpers. I used the following M5 screws/nuts for the thumbscrews
8x M5nuts
4x M5x20 Screws
The overall design was done in OnShape and can be accessed here.
Looper stacked stand - With Thumb Screws | Final Assembly (onshape.com)