Ender 5 dual Z plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a plate to upgrade the Ender 5 to a dual Z axis printer
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 124
- Makes
- 0
- Views
- 2,330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Most kits for upgrading the Ender 5 to a dual Z are provided with a plate to build the second Z axis inside the Ender 5 frame. Unfortunately, this will decrease the printable size of your bed as the hotend may collide with the lead screw. Specially if you have added a dual fan cooler like the Satsana, Hero Me, etc.
This plate replaces the kit's model, so the second Z axis is built outside the Ender 5 frame. Like the kit's plate, it will pinch the Ender 5 bed plate so you don't have to make holes or any modification to the Ender 5 bed plate.
To pinch the ender 5 bed plate, you can use:
- The 2 plates provided in the kit (but they are little bit too thick).
- Two 120 x 25 x 2 plates (OMIdeas or any other). As you can see on the photos, I have used 4 OMIdeas plates. Two above and two under the plate to strengthen it.
Printing:
- Filament: PLA ; PTEG
- Layer height: 0.2mm
- Infill: 80% - 100%
---
OMIdeas plates:
- https://www.amazon.co.uk/Heavy-MENDING-REPAIR-CONNECTOR-JOINING/dp/B073VZHNKH?th=1
- https://www.amazon.de/-/en/Connecting-Connectors-Connector-Perforated-Galvanised/dp/B073VZHNKH
Ender 5 dual axis kit: