Petamentor Motor Joint Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A redesign of the Petamentor motor joint coupling that sandwiches the motor shaft with a washer to make it more durable.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 51
- Makes
- 1
- Views
- 520
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I encountered slippage issues between the 12V 7RPM spool winding motor's shaft and the PETG/PLA motor joint as the plastic was not strong enough to handle the torque and it would yield after a short period in a high friction system like mine.
To counter this I added a slot for a ≤ø12mm 1.5mm thick washer to aid in pressure dispersal which has made a significant difference in the durability of the coupling as the flat side of the shaft is now pressed against the washer and not the soft plastic.
1x M3 nut and a <20mm M3 bolt are still needed as the shaft needs to be clamped down onto the washer.
Feel free to suggest any possible improvements for this remix.