usb cable guide
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.51 – €0.62 net (excluding VAT)
For file: cable-holder-1.2_0.2mm_PETG_MINI_38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.56 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 37.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cable guide or cable holder to avoid cables slipping of the table. Glues on the side of a desk with double sided tape.
- Rating
- 4.92 / 5
- Likes
- 100
- Downloads
- 632
- Makes
- 25
- Views
- 2,241
- Reviews
- 25
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
A cable guide or cable holder to avoid cables slipping of the table.
Glues on the side of a desk with double sided tape.
Cables can be inserted trough a lockable slit on the side.
Prints in place.
The normal versions have an inner tube size of 10mm. There is now also a model with 7mm inner tube size for smaller connectors.
Print instructions
prints in place, if the air gap is too tight, this can be adjusted in the scad file.
Version 1.1 is with a thicker lower lip.
Version 1.3 is with more airgap and a bigger slot for inserting the cables.
Version 1.4 In the scad file the height is now a parameter for configuration.