Workmate folding workbench leg springs – less support remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
replace brogen leg springs of your Black & Decker Workmate folding workbench
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 163
- Makes
- 2
- Views
- 585
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
I inherited a Workmate with all four leg springs broken. Looking to replace them I found the model by @noncorporealb_428881 which is precise in dimensions. I took it as a template to make a more printer friendly version that needs less support.
Printed in PETG, 0.4 mm nozzle, 0.25 mm layer height, 2 perimeters, 15 % gyroid infill (50 % with modifier for the not springy part), some organic support.
Assembly
From the original model description:
Use a hammer to knock the pin out to remove the broken springs, then just thread the new springs on and tap the pin back in.