Hoyt St puck remote Batwing XL case 3mf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3mf for printing the Batwing XL case for Hoyt St. puck remote.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Original creator is AaronTech2 from Thingiverse. https://www.thingiverse.com/AaronTech2
I initially printed it flat on the bed and it wasn't horrible but then I tried angling the pieces at a 45* angle with a raft and slim supports(some auto, some custom painted) and it came out even better. This 3mf is what I came up with for optimal print settings and object positioning. I used Polyterra matte black PLA, Bambu X1C, 0.4mm nozzle, 0.12mm layers, 215*/55*. The only issue I've had is trying to get the print looking good where the supports contact the object. May need to use smaller interface Z height or use a support filament preferably. If you plan to sand and paint then this isn't a huge deal.
“This is a larger version of the original Bat Wing case for the Hoyt Puck remote. This is a alternate case I created for the popular Hoyt Street Puck remote for esk8. Made to fit your hand a little more ergonomically. This uses 4x M2.5x20mm button head bolts to hold it together rather than the stock hardware. I used a paracord as the leash. Enjoy!” - AaronTech2