1 / 3
SV06 Fysetc ADXL345 RPi 2040 USB C input shaper mount — image 1
1 / 3

SV06 Fysetc ADXL345 RPi 2040 USB C input shaper mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

X and Y mounts for the Fysetc ADXL345 input shaper. Snaps into place on both X and Y carriages. 2x M3 screws needed.

Rating
0 / 5
Likes
10
Downloads
62
Makes
0
Views
724
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

The Fysetc usb c input shaper devices work amazingly and are super cheap; just plug and play with no fussy wiring.

I wanted a way to mount these solidly to the SV06 for measurements without using too much plastic. Came up with these designs and can confirm they work well. Print in whatever material you want; PLA works just fine.

The mounts just snap into place. The Y mount will require some effort, just do one at a time and support the build plate from behind. The X mount you need to untuck the Z probe cable and move the mount underneath.

The X mount prints inverted with supports; the surface quality doesn't matter as the interface with the board prints on the build plate.

Suggest 0.15mm layers to preserve the quality of the screw threads. You'll need some short M3 screws to mount the board up.

I've included a screenshot of the PCB base dimensions in case anyone wants to mix their own for their own printer; please don't judge my Fusion360 skills :'(

 

 

Tags