1 / 2
Popup print on fabric Spinning Origami — image 1
1 / 2

Popup print on fabric Spinning Origami

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Only four 0.2mm layers for this surprising popup spinning origami!

Rating
0 / 5
Likes
19
Downloads
53
Makes
1
Views
646
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Based on the origami popup card found here:
http://www1.ttcn.ne.jp/a-nishi/popup_spinner/z_popup_spinner.html

A layer of fabric is inserted after the second layer. It will serve as folding hinges.

Fold (mountain or valley) along the black lines, and cut the fabric along the red lines as shown in the pattern copied here:

About the printing parameters:

I would recommend using a shiny or satin filament to get the nice reflections on the bottom pattern. I use prusament PLA “Viva la Bronze”. I love it 🤩

You'll find every parameter I used in the .3mf file.

  • layer height: 0.2mm
  • top and bottom fill: concentric
  • perimeters: 40
  • pause before layer 3 to insert fabric (and change filament if you like
     

Tags