Whoop Wraps - Drone Storage and Transport Boxes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple and compact protection for tinywhoops
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 70
- Makes
- 0
- Views
- 496
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed these things to protect my growing collection of whoops. The fit is tight so they take up less room in a backpack. I designed with ~1mm of internal clearance, so quads won't bounce around while inside. Optional friction fit lids provide maximum protection. They should work with any CP or whip antennas you are using, as long as they aren't dangling too far out.
The non-"m*v2" versions, with the simple rounded cross section, should fit almost any whoop canopy you might use (with a total height of 40mm). The “m*v2” revisions fit fairly tight to betafpv meteor analog canopies, and may not fit others. 75 is for 75mm whoops, 65 is for standard 65mm whoops, and 65pro is for the meteor65 pro frame. The lid filenames match the main body file names.
No supports are required, no rotation is necessary. I printed mine with PLA, an 0.4mm nozzle, and 0.3mm layers. Just FYI the stl's are optimized for 0.3mm layers and 0.45mm walls.
Enjoy, and keep ‘em rippin’!