1 / 4
Coke bottle electric fence insulator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
edge and straight coke bottle top eclectic fence (wire) insulator holders.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 70
- Makes
- 0
- Views
- 625
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution
Edge (post or similar) and straight, electric fence insulator holders. Will suit typical 6/9 strand electric fence wire. Print and screw into place using pre made holes. maximum 5mm shank screw (typical width for 1.5" screws) after fitting the wire, screw coke bottle top down until minor resistance is felt.
Print from ABS / PETG (Weather proof). 4+ walls, 20% infill. Supports required, and depending on print angle, a raft too.