T-Nut für Prospekthalter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.98 – €1.19 net (excluding VAT)
For file: 2xT-Nut_0.1mm_PETG_MK3S_1h25m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.08 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 1.42 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
T-Nut für Profilschienenwand zum Befestigen von Prospekthalter oder Ähnlichem
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
T-Nut zu Befestigung von Prospekthaltern oder Ähnlichem an einer Wand mit entsprechender Profilschiene.
32mm x 15mm
Höhe 6mm bzw. 11mm
Bohrungsdurchmesser 3,5mm (für 4.0er Spax-Schrauben)
100% Infill im Bereich der Bohrung zwecks Stabilität erzwungen, kann aber auch entfernt werden.