Closet Pole Hangers
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.83 – €4.69 net (excluding VAT)
For file: Clothes_0.2mm_PLA_MK3_4h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.26 excluding VAT (range midpoint).
- Weight reported by the author
- 46 g
- Print time reported by the author
- 4.61 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple way to put closet pole between the two cabinets.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 19
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
So the wife wanted a closet pole mounted in the 30" gap between the two cabinets I hung in the laundry room during a recent remodel. One catch however, “I don't want holes in the cabinets in case I want to take it down." she said.
A little thought, and these are what I came up with. They simply hang on the edge of the top of each cabinet and the closet pole simply drops down between the cabinets holding the hangers in place. If you really want, a few pieces of double stick tape could be applied to the back of these to keep them from sliding around. To install, simply measure the distance between the cabinets and subtract ¼" (6 mm) from the pole length. These were designed for a standard 1 3/8" ( 34 mm) closet pole.
You can print these in any color you wish, but seeing how the cabinets were white, I stuck with the white theme.
The provided gcode file is printed 2-up and includes supports so I could print the exposed sides out and utilize the texture on my build plate.
Here are the settings that I used:
- .2mm layer height
- .4 nozzle
- 60% infill
- 4 layers top and bottom
- 3 perimeters
I used Overture PLA+, but you could also use PETG or Nylon for extra strength.