1 / 5
Quooker safety cap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds some child proofing to an old-style quooker boiling water tap. Prevents opening the tap unless you press it down.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
My old style quooker boiling water tap has nothing to prevent toddlers from opening it.
This cap provides a little protection. In order to open the tap, you have push down and then turn. You don't need to modify the tap at all, the cap just slides over it and is secured with a bolt.
Hardware needed:
- compression spring, about 30mm long and 25mm diameter.
- M3x30 socket head cap screw
- M3 nut
You can copy/view the Onshape design file here.
I printed this one in PETG (lipstick red). I printed it standing upright on the flat, with supports enabled.