Mazda Wheel Center Cap replacement 56mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D-printable replacement center cap for Mazda (or other) wheels with a 56mm diameter center hole.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 179
- Makes
- 0
- Views
- 1,285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This model was created to solve a dilemma.
I bought a set of wheels from a 2006 Mazda 3 that I want to use on my 2013 Mazda 3.
The wheels are in rough shape and had no center caps with them, but they were cheap.
I tried buying replacement caps from the jungle site, but the were wrong, and wouldn't clip in.
OEM clips are still available for these wheels, but they cost between $12 and $20 a piece!
So I decided to make my own.
What you're seeing here is version 3.1 of my designs. At first I tried to copy the OEM design with 5 or 6 little clips that would snap into the ridge inside the wheel hub. These didn't work very well because the tabs snapped off… This is also a problem with the injection molded ones you get from Mazda. They “fixed” it using a metal ring that expands the clips to make them stay in place. My design uses 7 small bumps on a thin rim at the correct depth to lock them in place correctly. To remove them just tap from the inside of the wheel gently with a flat tool, I recommend a hammer handle.
I don't know how long these will last in use, but they are very cheap and easy to print. (Each cap weighs about 8 grams.) After I get the wheels refinished and use them for a while I'll update the model with any improvements.
If you have a glass build plate you could probably get a sticker or something to add to the top of the cap. My PEI coated steel bed plate leaves a neat textured finish, so I'll probably just roll with that for now.