Blendtec Spline Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An experiment to try and remove the fasteners that hold the blades into a blendtec to try and replace failed bearings.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Terms used:
Spline - The shaft that comes out the bottom of the pitcher and engages with the base unit.
Hub - The metal cylinder inside the pitcher that is right on-top of the blades.
This adapter fits the proprietary spline on a blendtec pitcher and adapts it into a ½ socket insert. Unfortunately the hub inside the pitcher is smooth, featureless, and nearly frictionless. My spline adapter never failed, but unfortunately vice grips couldn't hold onto the hub with or without that adapter.
Also worth noting that the threading is left-handed type from what I've seen in a single video where someone got one of these free and ultimately destroyed it in the process. Also apparently the bearings themselves are ultrasonic welded. The black ring around the edge, is what's fused to the pitcher itself to retain it.
Also included is an experimental attempt at a printable hub-adapter.. maybe in TPU it would have enough friction and toughness to work? In PLA that part crushed in my vice-grips, but they're vice grips.. so expected.
