ELEGOO NEPTUNE 3 PRO/ PLUS/ MAX HIGH PERFORMACE COOLING FAN UPGRADE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HIGH FLOW, LOW PROFILE, SPACE SAVING, AAAND YOU CAN SEE THE NOZZLE.
- Rating
- 5 / 5
- Likes
- 183
- Downloads
- 872
- Makes
- 9
- Views
- 8,769
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
MY TAKE ON HIGH PERFORMANCE AIR FLOW FOR THE NEPTUNE 3 PRO/PLUS/MAX.
I WOULD RECOMEND THIS FOR ANYONE USING A .6MM+ NOZZEL AND NEEDS SOME EXTRA COOLING.
I WONT GO INTO THE SCIENCE FOR THIS ONE.
IF YOR LOOKING INTO THIS, YOU PROBABLY ALREADY KNOW YOU NEED IT AND WHY.
USES 2 5015 BLOWER FANS
USES TWO M4x20 SCREWS FOR FANS
USE THE FACTORY SHROUND MOUNTING HARDWARE OR TRY THESE ULTRA LIGHTWEIGHT TITANIUM ONES.
2.0 PIN CONNECTOR FOR FANS SO YOU DONT HAVE TO CUT YOUR STOCK ONES LIKE I DID.
*IMPORTANT NOTE ABOUT THE CONNECTORS LISTED ABOVE:
RED AND BLACK ARE BACKWARDS COMPARED TO ELEGOOS WIREING! MUST SWAP RED AND WHITE TO GET FANS TO WORK WHEN USING THESE CONNECTORS
START OUT AT 50% MAX FAN AT FIRST AND TUNE IT TO YOUR ENVIRONMENT.
I DO RECOMEND RUNNING ANOTHER PID TUNE FOR NOZZEL TEMP AFTER INSTALL TO MAKE SURE NOT TO TRIP THE THEMAL RUNAWAY OF YOUR MACHINE FIRMWARE DUE TO THE INCREASED COOLING.