1 / 3
Did you feed the kitties?
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My cats like to lie to me about being fed. This will help me see through their lies... until they figure it out.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 47
- Makes
- 0
- Views
- 444
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial
Dog Version : https://www.printables.com/model/501275-did-you-feed-the-dog
None of the parts should need supports.
You can use nails or pushpins to mount the tracker.
Time Labels
- color change after 1 mm
- At least 4 top layers
- Infill 10%
- Glue these to the wheel
- If feeding 3x a day, print 2 of each
- If only feeding morning and evening, print 3 of each of those
Face plate
- color change after 2 mm
- At least 4 top layers
- Infill 10%
- may need to be glued to the back, or use double-sided tape to be able to remove it if needed.
Back
- I used 2 perimeters and lightning infill to minimize filament usage.
Rod
- 3+ perimeters
- 20%+ infill
- Brim
- Can add supports if you want
- print upright
- This can be glued in or screwed in with M5 screws