Voron V0.1 Bottom panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bottom panel for the V0.1 Trident Skirt remix
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 13
- Makes
- 0
- Views
- 430
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Bottom panel for the V0.1 mod Trident skirt remix of damian-gdes
Printed in PLA. If printed in ABS maybe to print upscaled 100.5%
BOM:
4 M3x20 BHCS (if heat inserts are used) or 3x M3x20 plus 1x M3x45 -> to replace the srews for the feet
4 M3 5x4 heat inserts (Voron specs)
Preparation (optional):
- enlarge the holes for the feet with a 4.5mm drill
- melt in heat inserts
Mounting the PTFE tube:
Pull the tube from the holder of the corner feet and insert into the hole of the back wall
Thanks to damian-gdes who made my V0.1 nicer
with his mod: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/golas/v0-trident-skirt-mix
Thanks to Steve, Nero 3D and Sanity for all their help and patience and all the others who helped