China Bluetooth speaker board XY-C15H for Makita 18V aku
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing for a bluetooth receiver-amplifier, powered by a makita power tool battery.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 1
- Views
- 572
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
The battery holder (L and R side) is universal (fits many projects with makita batteries) and uses a standard ready-made insert “makita battery connector” (yellow or black e.g. from here: https://www.aliexpress.com/item/1005004542983429.html $3.82 for 5pcs). 
Both sides are pressed together, first inserting the battery connector between - the print is calibrated that printed on the bambulab x1c printer it enough to press it, and holds on tight. On other printers - it is possible that you will either have to sand it or use glue.
Bluetooth receiver with digital aplifier (class D) - XY-C15H - from here: https://www.aliexpress.com/item/1005005357680253.html - when powered from 18v aku - make great sound and have power over 2x30W ! When using bluetooth (aux-in is not in use in our case) you can use APP and set EQ in this chip etc. Realy nice board. 
In rear of amplifier housing is place for power-on switch known as KCD1-110 like this:
https://www.aliexpress.com/item/1005001528260806.html

On top we have hole for battery level indicator - remember to take one for 5S battery (18V lipo/liion) or universal version, and solder bridge for 5S.
https://www.aliexpress.com/item/1005001782155135.html

XY-C15H and level indicator are mounted by M2 or similar small screws.
On side is place for speaker-connector like MonacorPT-932 etc. - very popular and cheap:
https://www.aliexpress.com/item/1005002411206163.html 