Ladící šroubovák Tesla (pro televize Tesla) / Tuning screwdriver for Tesla TVs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ladící šroubovák pro starší televize Tesla. / Tuning screwdriver for older TVs made by Tesla Czechoslovakia
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 42
- Makes
- 0
- Views
- 299
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
Kopie ladícího šroubováku pro televize Tesla. / Copy of tuning screwdriver for Tesla TVs.
Doporučuji PLA místo PETG. Je to jednodušší na nastavení. / I recommend PLA instead of PETG. It's easier to set up.
Gcode z verze rc1 Prusasliceru 2.6.0 / Gcode generated by Prusaslicer rc1 2.6.0
Zdrojové soubory dostupné níže v f3d formátu. / Source files available below in f3d format.
Tiskové parametry / Print parameters:
Výška vrstvy / Layer height: 0.15mm
Podpěry / Supports: Všude / Everywhere
Výplň / Infill: 35%
DŮLEŽÍTÉ / IMPORTANT
NASTAVENÍ FILAMENTU - chlazení/ FILAMENT SETTINGS - cooling !!
Používám předdělané FilamentPM PLA/PETG filamenty
I use premade FilamentPM PLA/PETG filaments
Pro /For PLA:
Minimální rychlost: 10 mm/s
Pro /For PETG:
Max rychlost ventilátoru / Maximum fan speed: 100%
Podmínky chlazení / Cooling conditions
Zapnout ventilátor… - 30 sekund / Turn on the fan… - 30 seconds
Zpomalit tisk… - 30 sekund / Slow down printing… - 30 seconds
Minimální rychlost: 10 mm/s