Dayton Audio DTA-PRO Micro-USB Strain Relief
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strain relief designed to protect the fragile Micro-USB connector used for USB connectivity on the Dayton Audio DTA-PRO
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 237
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Strain relief designed to protect the fragile Micro-USB connector used for USB connectivity on the Dayton Audio DTA-PRO. Quickly printable without supports in the default orientation within your slicer. Designed to work with the USB cable that came with this amplifier, will likely not work with every USB cable. Simply remove the two left-hand screws on the rear plate and reinstall with the strain relief in place. Leave fasteners quite loose until inserting the usb cable through the strain relief and into the port to ensure everything is aligned. Tighten fasteners and enjoy.
Not responsible for any damage that may be caused by the disassembly of your amplifier or the installation or usage of this part.