Bullitt kickstand feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When your kickstand feet are worn down to the bare metal of the kickstand, the time has come to replace them. Print…
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 90
- Makes
- 2
- Views
- 503
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
When your kickstand feet are worn down to the bare metal of the kickstand, the time has come to replace them. Print two of these, replace them with the old ones, and you are ready to haul more cargo and/or kids on your beloved Bullitt bike. You can print this with less infill than 100%, but the more material you put in the feet, the longer they will last.
They will fit the standard aluminium kickstand for the Bullitt cargo bike. There is 10 mm of "thread" to wear down in this.
Update: Now there is e version with 20 mm of thread, that the kickstand pipes rest on.
If your kickstand have been used for some time with worn out feet, so that the metal touches the ground when parked, the bottom of the aluminium kickstand might have deformed, so the new feet won't fit before you file away the deformation, so the tube end is back at the original diameter.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Infill:
100%
Notes:
I have printed this in PLA, and the fit is perfect. If you print this with ABS material, you have to factor in the shrinkage. But if consider ABS, you probably know what to do.
Category: DIY