1 / 6
BugBu Belt Drive
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a belt drive for the BugBu 210 and 260 that still uses only one motor.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 72
- Makes
- 1
- Views
- 550
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
NOTE: Z Rotation Distance Will Need Changed From 8 to 13.1 For This Mod In The Config
This mod will convert your BugBu 210 or 260 to a belt driven bed instead of triple lead screw driven. This mod will use all of the existing non printed components of the 260, but will require several of the 260 components to use on the 210. Please see the INSTRUCTIONS for details specific to each printer. This design uses a single z motor still with an open loop belt drive. Please see the BOM specific to the printer model for items needed.