Intel NUC under Desk Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.15 – €3.85 net (excluding VAT)
For file: intel_nuc_under_desk_mount_02mm_petg_mk3s_3h51m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.50 excluding VAT (range midpoint).
- Weight reported by the author
- 39 g
- Print time reported by the author
- 3.85 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I designed a under Desk Mount for my Intel NUC 10 (NUC10i5FNK).
- Rating
- 5 / 5
- Likes
- 70
- Downloads
- 512
- Makes
- 2
- Views
- 4,037
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
I designed a under Desk Mount for my Intel NUC 10 (NUC10i5FNK).
It is for the Version without HDD (only PCIe NVMe Drive), the HDD Version is higher...
The NUC has 4 Rubberfeets on the Bottom. And there 4 matching Holes in the Holder, that holds the NUC in Place. At the Backside is a little Stopperthing.
You can take the NUC out off this Holder without unscrewing it. The Screwholes a designed with 4,5mm.
Print instructions
I used 25% Infill and 3 Perimeters with Prusament PETG