Mango Planter with hexagons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
another strong planter pot with hexagon ornaments and improved draining system
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- GNU General Public License v3.0
TL;DR
A very hugh strong garden planter, 20cm wide, 20cm height, 6 liter made from PETG.
Collection
Motivation
My wife needed some unique planters for her mango experiments.
And i liked to play with the lattice2 workbench in Freecad.
Let's get started
For Freecad users have a look at the lattice2 workbench, while there is nearly no documentation since this wb was written in 2016 this is has awesome super powers.
This planters are not light weight weak vase mode covers they are real planters the substrate gets directly into this planters.
To vase or not to Vase?
While this model is made to be printed as a strong container you could for sure, print it in vase mode to get the nice pattern effect and use the so printed planter as a decorative “Übertopf”.
If you like to have the drain system of the strong variant, you can do that in vase mode by increasing the number of bottom layers up to 6.5mm - that includes the whole draining system to the vase mode version.
In vase mode the print needs less filament and prints much faster.
Attribution
https://www.youtube.com/@MangoJellySolutions
Can I sell copies of this?
Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0.
Donation
If you like to donate you can buy me a ko-fi
Filament used
extrudr PETG
Printed with 0.6 mm nozzle and a layerheight of 0.45 mm.