GPU Stand (3070TI & Corsair 4000x)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple GPU jack to support the corner of the GPU. It consists of two threaded parts.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 238
- Makes
- 1
- Views
- 1,505
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
A simple design consisting of two threaded parts. It is made to support and lift the corner of a gpu to lighten the load on the connectors. Since it is threaded, the height can be adjusted. Minimum height is 67 mm while maximum is around 92 mm so you should measure the distance between bottom of the gpu and the case.
I've added the fusion files so you can edit however you like.
I suggest sticking double sided tapes to both sides of the stand for the cushioning effect. Do not peel the other side of tapes.
Layer Height: 0.12 mm at threads
Shell: 3
Support: No
Filament: Depending on the temperature inside the case you may prefer ABS or PETG. I'm using PLA currently.