Adaptateur sortie de climatiseur Gaine Ø150 mm
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.38 – €2.90 net (excluding VAT)
For file: Pierds Entretoise_0.3mm_PETG_MK3S_2h7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.64 excluding VAT (range midpoint).
- Weight reported by the author
- 47 g
- Print time reported by the author
- 2.12 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adaptateur pour sortie climatiseur (air chaud / air froid) Gaine Ø150 mm
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 93
- Makes
- 0
- Views
- 1,516
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Adaptateur pour sortie climatiseur (air chaud / air froid) pour gaine Ø150 mm
- Buse 0.4 mm PLA ou PETG
- Sans support
- Couche 0.3 “Draft”
- Remplissage 15% gyroïde
- 3 périmètres
Assemblage:
- 11 vis TH M4x12
- 11 écrous M4
- 22 rondelles M4
Le pieds d'entretoise et l'entretoise doivent être collée.
N'oubliez pas de mettre un petit ❤ si vous avez aimé, merci
Attention
Si vous utilisez l'adaptateur en sortie air froid avec une gaine de grande longueur, il faut isoler de l'air ambiant l'adaptateur et la gaine sinon il y aura de la condensation qui se formera sur ces éléments.