1 / 11
Prusa MK3S PiCam V2.1 X-axis mount combined with X-axis cable protection — image 1
1 / 11

Prusa MK3S PiCam V2.1 X-axis mount combined with X-axis cable protection

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Based on the wonderful idea of tinkr3d (https://www.prusaprinters.org/prints/46866-prusa-mk3s-pi-camera-v21-mount-…

Rating
5 / 5
Likes
42
Downloads
219
Makes
2
Views
1,584
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Based on the wonderful idea of tinkr3d (https://www.prusaprinters.org/prints/46866-prusa-mk3s-pi-camera-v21-mount-with-optional-x-axi) as well as various X-axis cable protection variants, I created a design that combines the advantages of both components. The cable protection now stabilizes the x-axis-cable and camera mount at the same time.

I created a new cable protector to hold the Raspberry camera bracket. I have adapted all parts of the camera mount accordingly for this.

I printed the bracket on the motor with the original Prusa PETG, the other parts in PLA.. The front cover of the camera I printed with a resolution of 0.1mm because of the stability of the small pins. I had to offset the pins by 0.5mm, the mounts of my camera board have a distance of 12.5mm (instead of 12mm).

For the assembly is needed:
1 cable tie (165x2.5mm)
1 screw M3 x 18
Both are included with the spare parts for the MK3S.

Update 01.01.2021:
Addition of the file with all models as STEP file. I would wish that many more users also share their model files (as well as tinkr3d , thank you very much). Editing STL files is usually a pain.

Print instructions

Category: 3D Printer Parts Summary

I printed the bracket on the motor with the original Prusa PETG, the other parts in PLA.. The front cover of the camera I printed with a resolution of 0.1mm because of the stability of the small pins. I had to offset the pins by 0.5mm, the mounts of my camera board have a distance of 12.5mm (instead of 12mm).

Print Settings

Printer Brand: Prusa I3 MK3S

Rafts: No

Supports: No

Resolution: 0.1 / 0.2

Infill: 15%

Filament: Prusa / Fillamentum PLA / PETG Black/Orange

The front cover of the camera I printed with a resolution of 0.1mm because of the stability of the small pins. I printed the bracket on the motor with the original Prusa PETG, the other parts in PLA. The front cover of the camera I printed with a resolution of 0.1mm because of the stability of the small pins. I had to offset the pins by 0.5mm, the mounts of my camera board have a distance of 12.5mm (instead of 12mm).

Tags