Challenge Coin Display / Challenge Coin Holder two options
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two options for displaying challenge coins. Tall vertical and short desktop
- Rating
- 5 / 5
- Likes
- 106
- Downloads
- 906
- Makes
- 3
- Views
- 5,019
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Two different options for displaying challenge coins. The first is a tall vertical stand. You will need supports when printing the middle flat, or you can stand it on end and print without supports. The second is a small desktop display. Print top down and the bridging should eliminate any supports. printing on the side may do the same.
For the 3 piece stand there's a 0.2mm tolerance built in for a press fit. If that is too loose, you can apply a small amount of glue.
Like my work and want to say thanks? Buy me a Coffee https://www.buymeacoffee.com/pwmodder1027