Star Realms Authority Counter (0 – 50 or 0 – 99)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An authority counter meant to replace the stock set of 18 authority tracking card in the Star Realms card game.
- Rating
- 4.833 / 5
- Likes
- 59
- Downloads
- 355
- Makes
- 5
- Views
- 2,905
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
An authority counter meant to replace the stock set of 18 authority tracking card in the Star Realms card game.
The counter fits in the base game's deckbox (with the authority cards removed).
Print instructions
Supports may be necessary for the dials, depending on your printer's bridging ability.
Print:
- 2x 0-9 dials
- Lid
- Base
- Spring (optional)
For counters from 0 to 50, also print 2x 0-5 dials
For counters from 0 to 99, print 2x Reversed 0-9 dials instead
I initially colored the numbers with a white paint pen and coated with spray paint, but I felt like that was going to wear off eventually. I reprinted and did a filament swap after Z=2.0 instead (see third image).
The spring is optional, but I found the counters spun a bit loose without it.
The lid and base hold together ok with friction, but I'd recommend adding glue to make the bond stronger, and keep the lid from lifting in the center edges.