Dodecahedron - See new solid wall version at "cncMaker1976"
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.51 – €0.62 net (excluding VAT)
For file: pentagon3_02mm_petg_mk3s_41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.56 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 40.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
For the Prusa MK3/S, print 12 pentagons in either PETG, PLA or use the STL file to slice for your printer.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 116
- Makes
- 0
- Views
- 741
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
For the Prusa MK3/S, print 12 pentagons in either PETG, PLA or use the STL file to slice for your printer. I used PETG at 20% infill. Print time 41 minutes.
Assemble the Dodecahedron using 60 small zip ties , 10cm in length. The angled edges of the pentagon face inward. Use needle nose pliers to pull the zip ties tight and small nippers to cut off the excess. Assembled piece 6" (150mm) in diameter.