1 / 2
Parasol Crank Clamp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple clamp to keep the crank on my parasol from turning inadvertently.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
My parasol is of the crank driven kind: Turn the crank and it opens or closes.
Over the years, the parasol has aged quite a bit and the crank mechanism became a bit loose and now it tends to close itself. I made this little clamp to hold the crank to the post so the parasol stays open.
The clamp has been designed for a post diameter of 46 mm. I attached the DesignSpark Mechanical file so you can change the model if you need to.
The print is nothing special, PLA with a quick 0.3 mm layer height with 25% infill will do.