1 / 8
Drill Holder (Printinplace) - HSW Honeycomb Wall — image 1
1 / 8

Drill Holder (Printinplace) - HSW Honeycomb Wall

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print-In-Place tiltable Drill Holder for Drills from 1.0-13mm with 0.5 steps.

Rating
4.875 / 5
Likes
357
Downloads
1,847
Makes
17
Views
6,355
Reviews
16

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is my first printinplace model for the Honeycomb Wall. I want a drillholder that is tilts forward so that I can see and grip the drills better.

The drillholder is for drills from 1mm - 13mm with steps of 0.5mm. On top is a labeling for the drill diameter. The upper pegs are designed to print without support, because they should only prevent the holder from tipping forward.

I print the holder with the Bambu X1 in ABS with two colors. The clearance for the hinges fit for me with 0.15mm. 

I uploaded two versions with 0.15mm and 0.2mm clearance. If anyone needs a model with more clearance, write a comment with the needed clearance and I upload a suitable version.

It can happen that the filament connects in the guide. Then simply press the two sides slightly outwards with light pressure so that it loosens.

Step-File is provided.

Print-Settings:

  • 0.2mm Layerheight
  • Support: No
  • Materials: ABS or PLA is tested.
  • Bambu X1: Use the STEP-File to make a multicolor print (3 Objects). Color the labeling with layered color selection. Or use the 3MF-File.

Tags